Phone: (303) 544-6076
  • Pinterest
  • Houzz

Strandwoven® TIMBER™ Wood Flooring

Created using post industrial wood scraps, Strandwoven® TIMBER™ is the epitome of sustainable flooring while offering the look of classic wood but with a much greater hardness and greater stability than standard species.

Sustainability Story

Strandwoven® TIMBER™ symbolizes Sustainable Flooring’s innovation in the realm of recycled materials. Industrial ‘by-product’ wood veneers are mixed with low-VOC additives and pressed into a composite ‘wood strand’ block that not only has tremendous hardness (approximately 3 times that of Oak), it’s stability is also greatly increased (due to small size of input fibers).

Read More
The Natural and Sunburst products have the color throughout the entire flooring plank (ie: if sanded, same color appears beneath). The Teak Light, Mocha, and Flat Irons are topically stained on top of the Sunburst color/pattern. Each product is protected with 7 coats of a commercially rated, water-based urethane coating, designed to allow for long lasting beauty.

  • Extremely hard (ie: dents less, and when it dents it does so to a lesser degree) decreasing unsightly impact-induced wear
  • Unmatched stability (ie: less expansion/contraction than other natural woods, effectively decreasing topical water product damage)
  • Made with low-VOC, E0-compliant, and NAUF (No Added Urea Formaldehyde) glues (ie: components won’t negatively affect indoor air quality)
  • A complimentary line of line of transitions and accessories are available (including Stair Treads and millwork panels in the Sunburst)

Technical Data

Extremely hard and stable – over two times harder than commonly used Oak and more stable than all other traditional wood products.

Read More
Natural Sunburst, Teak Light, Mocha & Flat Irons
Dimensions Solid: ½” x 5-3/8” x 48" Solid: 9/16” x3-7/8” X 72”
Sq. Ft. / Box 18.08 sq. ft. 15.53 sq. ft.
Edge Detail Micro-bevel on all sides with NO aluminum oxide Micro-bevel on all sides with NO aluminum oxide
or Unfinished (square-edged)
Hardness 2875 psi JANKA
Finish 7 coats of commercially-rated, water-based Treffert (NO Aluminum Oxide used)
LEED Points
  • MRc6 – Rapidly Renewable Materials
  • IEQc4.4 – Low Emitting Materials – NAUF

Associated applicable points based on installation:

  • IEQc4.1 – Low Emitting Materials: Adhesives and Sealants
  • MR 4 (Recycled Content (100% recycled, post-industrial content)
  • IEQ 4.4 (Low Emitting Material)

Associated applicable points based on installation:

  • IEQ 4.1 (Low Emitting Materials: Adhesives and Sealants)
  • IEQ 4.2 (Low Emitting Materials: Paints and Coatings)
Installation Nail/Staple, Glue-down, or Float

Gallery